Home > Hard Drive > I Installed A New Hard Drive Now What?

I Installed A New Hard Drive Now What?


Prepare the hard drive for use Once you’ve mounted and connected the drive, power up your system and enter the BIOS/UEFI. Please try again later. If you already have a SATA drive installed, follow its power cable (the wider of the two connectors) to see if an unused power-supply lead with the same connector is nearby. solved PC not booting up after installing new 550W PSU but works fine on a stock 300W PSU Problems booting into XP pro after fresh install on new system More resources navigate here

Here i want to recommend two softwares. How to install new memory in your PC How to replace your PC's motherboard How to install a graphics card How to install a new hard drive in your... Laptop drives will obviously be smaller, but have the connections have the same appearance. The good news is that learning how to install a new hard drive isn’t difficult, so there is no need to be concerned about a hard drive that is nearly full.

What To Do After Installing A New Hard Drive

If so, then it appears that a SATA/IDE adapter cable CAN be used to clone or reimage; guess I also need to know if this means that EVERYTHING on the hard Some may have metal retention clips, while others do not. Advice very much appreciated. However, the hard drive is one of the most critical components in your system because it stores all of your information.

  1. Half LifeNov 8, 2013, 7:18 PM ok, here are your options, as far as i know: a) some of these pc manufacturers can actually ship you rescue cds for just shipping
  2. I don't know if it will work with installing just one.
  3. PCAnswersMagazine 334,854 views 9:47 Hard Drive Not Found Error on boot up by Britec - Duration: 10:01.
  4. Click Next yet again (to the Format Partition screen), and ensure that "Format this partition with the following settings" is selected and that the "File system" drop-down reads "NTFS." Click Next
  5. Step 5: Partition and format your hard drive Access Windows XP's Disk Management function from the Administrative Tools window in Control Panel.
  6. The process isn’t overly difficult, but is detailed enough to warrant its own post.
  7. Reply Charles April 26, 2016 at 7:53 am "Complete Hardrive switch?" (With the terms of removing an old build's hardrive with a bcd error corruption of Win7; for a new hardrive
  8. when you find that cd, just power on your pc, open the cd drive, insert the media and power off and on again.
  9. If you don't have one, you're going to have to buy one, or make a recovery disc from another computer.

Please note that not all laptops are intended to be user serviceable in this way,  so please read your laptop’s manual for information about hard drive replacement before proceeding. Thanks so much! First, the data connection. How To Install A New Hard Drive Windows 7 If you’re using a computer that has more than one hard drive bay you’ll find the process of transferring data from one drive to another to be easy.

Drives last longer when they stay nice and cool. Options Mark as New Bookmark Subscribe Subscribe to RSS Feed Highlight Print Email to a Friend Report Inappropriate Content ‎02-25-2013 04:03 PM I have just finished installing a New Hard drive Loading... However, when I went into Advanced Options->Boot, It was there.

You can easily tell the difference between the two because an IDE connection uses numerous pins, while SATA uses a pin-less L-shaped connector. How To Install A New Hard Drive On A Laptop Once the old drive’s image has been cloned and placed on the new drive, you can simply remove the old drive or reformat it and use it as a second drive You can follow him on Twitter or Google+. To confirm that Windows recognizes the drive, open up Device Manager.

How To Format A New Hard Drive

Good luck ;) junaid khan July 30, 2012 at 4:27 am but in the boot menu during booting and entering in booting setup ....when i checked the boot sequence it was Some enthusiast-class also cases give users the ability to remove drive cages or to mount them in different positions to optimize air flow and simplify cable management. What To Do After Installing A New Hard Drive Due to a claim by a copyright holder, the audio track has been muted. How To Install A Second Hard Drive Removing the cover will reveal the drive, which is itself typically attached with a few screws.

Or , do I have to use a "Boot Disk"? check over here Published on 18 Sep 2011in this tutorial i will teach you how to install a copy of windows 7 64 bit on to a blank brand new hard drive .if you To comment on this article and other PCWorld content, visit our Facebook page or our Twitter feed. But the tricky part is accessing the drive in the operating system once it has been installed. Install New Hard Drive Windows 10

You have to switch back to HDD after the loading the OS on your machine.Regards. If so go into control panel/administrative tools/computer management/storage/disk management allocate the drive and assign it a drive letter. How to avoid common PC building mistakes How to install (or replace) a case fan Replace your PC's heart: How to install... http://custsolutions.net/hard-drive/i-need-to-get-files-off-old-hard-drive-onto-new-hard-drive.php Using right-angle connectors on the motherboard side will will result in blocked ports, because the connector may overlap adjacent ports.

For those who may need it, Here's the motherboard I use.Note: I plugged in the SATA Power 3.0 cable that came with my motherboard into this drive, should I have used New Hard Drive Not Showing Up Marco Chiappetta The SATA power cable connection looks similar to the data cable, but is longer. Check www.seagate.com/support/kb/disc/faq/137_overview.html for tips on resolving this problem.

Thanks for the tip.

Jason Hammack 179,559 views 6:49 How to Replace a Desktop Hard Drive - Duration: 5:54. This hard drive is flipped upside-down to show its parts. Sorry There was an error emailing this page. How To Install A Second Hard Drive Windows 7 Securing the drive to a cage usually requires four screws on the sides or bottom of the drive.

Reply Leave a Reply Cancel reply Your email address will not be published. Reply darkduck January 25, 2011 at 6:21 pm "not all laptops are intended to be user serviceable in this way, so please read your laptop’s manual for information about hard drive Close Yes, keep it Undo Close This video is unavailable. weblink However, these brackets are often less secure than traditional screws.

Reply 0 0 Drwho46 Tutor Posts: 12 Member Since: ‎02-19-2013 Message 5 of 15 (23,052 Views) Report Inappropriate Content Re: What to do next after installing new hard drive. Sign in to add this to Watch Later Add to Loading playlists... Booting & Partitioning Once you’ve replaced your old drive you will, of course, want to boot up your PC to make sure everything is functioning well. greatestunknown 1,336,367 views 8:36 How to Replace a Desktop Hard Drive - Duration: 5:54.

NCIX Tech Tips 324,752 views 10:14 How to Install a Second SATA Hard Drive - Duration: 3:17. it will reboot a few times, but your pc will be ready once it is done maxii16Nov 8, 2013, 6:58 PM That's the problem, I do not have any of the Most hard drive kits include a data cable (SATA or IDE, depending on the drive), a power adapter cable (with some SATA drives), and screws.