Home > How To > I Just Got Another SATA HDD

I Just Got Another SATA HDD

Contents

and to remove some unwanted partitions (no doubt using the long way around, but what the hell.)KV PaperdocMay 21, 2010, 5:08 AM From the sound of this you MAY have an but this one point, in the descriptive text (not the type or category or interface like common sense would figure,) it's marked as being SATAII... If you can see some spare sockets, then congratulations – you can now go buy a second drive! My HD cable reads "150 v". his comment is here

Using screws is the more robust mounting method, but tool-less trays are fine for systems that won’t be moved around much. Most ribbon cables have 2 attachments - your main drive should be attached to the master attachment. There is no software. How We Test Laptops Still lost?

How To Connect Two Sata Hard Disk In One Pc

Any later program installations (apart from system-related ones) will be done to the new disk – have a dedicated place/path for that. Win+R (initialize run command) 2. I like to use SATA cables with right-angle connectors on the drive side, provided there is adequate clearance between any drives in the system. Put it in the 'maybe' category. :) Reply Leave a Reply Cancel reply Your email address will not be published.

  • He spends an absurd amount of time in the VR room and tinkering with DIY home automation systems.
  • I did everything is great on the old good HD, but i can't access the failing HD.
  • They can be cheap enough and even USB 2.0 would be faster than a hard drive, SATA or PATA, connected through PCI.
  • http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=199419&Hilite= Helpful +13 Report Studksc Jan 6, 2009 at 11:21 AM This was great advice I am running vista 64 and it all worked fine, thanks my friend for sound advice.
  • the logic is, you'll have to format any storage device to make it ready for use - may it be internal or external like a flash drive. *****using the same way
  • noob question solved How do i install windows 7 from a disk to a hard drive using a usb to sata connector ?

no power to the drive 2. Tip: Using a SATA PCI interface card? Report George Sr.- Apr 25, 2010 at 08:28 PM Thank you very much, I couldn't figure it out by myself. How To Connect Two Hard Disk In One Pc If your PC has only one IDE hard drive, it's probably set to "master." Assuming you chain another IDE drive off its cable, the new drive should be set to "slave."

Video Tips Try to use SATA drives instead of IDE because they are usually faster and the wide ribbon cable for IDE drives blocks airflow. How To Install A Second Hard Drive Windows 10 But you say you installed the replacement "via a USB Adapter". That way, you can easily boot from a CD or DVD without altering the BIOS settings, but it might add a few seconds to the boot time while the optical drive Each setting changes how your computer operates and you can inadvertently make your computer inoperable.

this is why I get through the dayz with guys like this cause there's things you just don't understand... Second Hard Drive Not Showing SATA hard drives work pretty much the same. When you’re done connecting the SATA cable, you’ll have to connect the drive to your power supply unit (PSU). Check the BIOS auto detect to ensure the second drive is detected.

How To Install A Second Hard Drive Windows 10

Report Sujit- Apr 11, 2010 at 03:05 AM Thanks boss, I was about to return the HDD as I thought it has some problems, but followed ur instruction, and I succeeded. SATA drives use a thin, seven-pin data cable; IDE drives use a 40-pin ribbon cable that's usually gray. How To Connect Two Sata Hard Disk In One Pc Reply Terrion September 10, 2016 at 12:36 pm Hello, I have a question. How To Install A Second Hard Drive Windows 7 You have the option of either changing the jumper (small black clip) on the back to make the drive a slave (secondary) (use small tweezers to remove and replace according to

I dont agree about users with SATA not needing this article though - it was aimed at quite low level users for whom opening their pc case is perhaps something they've Required fields are marked *Comment Name * Email * James Bruce 631 articles James lives in the middle of nowhere with his wife, son, and chickens. They will be labeled on each connector). Next, plug the power-supply lead (keyed, too) that you scouted out in step 2 into the drive, including any necessary extender or adapter. How To Install A Second Sata Hard Drive

The  SATA power cable from your PSU, like the SATA data cable, is keyed to fit onto the drive one-way. then that'd definitely be helpful - since we treasure our USB slots *grins*I am... Let’s do this! 1. http://custsolutions.net/how-to/i-see-the-sata-ports-on-my-motherboard.php No problem: just buy and install another hard drive.

your advise rally helping many.best of luck for your future Report pete_thorn- Mar 25, 2009 at 04:19 AM Hi, sorry for bothering you but I have a similar but slightly different How To Configure A Second Hard Drive solved Can I add another hard drive to an Asus ZenBook pro UX501VW? Try to find SATA cables with metal retention clips, because they help keep the connectors secured.

Reply James Bruce January 22, 2011 at 12:07 pm Thanks Brad, thats what I was aiming for.

Any ideas? The SSD should be given the highest priority in the boot order. 3. Using Acronis Disk Director , I simply had to reassign a drive letter to my hard disk partition, it will be detected by My Computer, with all data accessible too! How To Install A Second Hard Drive In A Pc Then you format the partition - again right click and select format use NTFS - use default allocation size and give the new volume a label (no spaces allowed in the

Does that mean you bought an "External Drive" in its own case that connected to your computer via a USB port? (It would have had a separate power supply, too, I This second, and most recent SATA II drive was shown as being a Serial ATA drive/SATA drive and only once in the description portion of the ad as a SATA II Some cases come with tool-less brackets that make mounting hard drives really easy. The connector end broke in my HD cable when I was pulling it out.

It may have its own BIOS to check. But there usually is a SIMPLE way to deal with this built into the drive! Next, find the spare power cables and the SATA cable, and plug those in. Drives last longer when they stay nice and cool.

However, these brackets are often less secure than traditional screws. the Global Study Desk nadun flower Reply Priyankar November 22, 2016 at 4:11 am I did the same as you written in the post but didn't find the 2nd HDD option Powered by Mediawiki. More-recent desktops may use (or just support) SATA drives but should support IDE, too.

Reboot your computer 3 Find the area where all the flat ribbon cables (or SATA cables, which are smaller and usually red) connect to the main board. (fig. 3) Find the I am going to try and install Windows on this drive, but I fear it may be gubbed :( Report NickNYC 15Posts Saturday February 14, 2009Registration date February 17, 2009 Last solved Could I add another hard drive to store all my games and keep my main hard drive free of space ? SATA port disabled in the BIOS 4.

There are two possible types of power cables, and you will of course need to find a spare one in your system that you can use.