Home > Hp Laptop > HP S3505F No Start

HP S3505F No Start

Contents

HP PS/2 optical mouse Figure 10: Top view of mouse Interface: PS/2 Buttons: left (select), right (context menu), scroll wheel (scroll up/scroll down) Software Titles that shipped with PC NOTE: HP If the power LED lights are not illuminated, continue following these instructions. I have sent mine in 4 times under warranty to have the motherboard replaced as it was defective (or so I was told). Hold down the power for 10 seconds, this will discharge any electricity stored in the Psu and motherboard.

For steps on how to replace the CMOS battery on your HP or Compaq computer, see Removing and Replacing the CMOS Battery. If the Recovery Disc Creation software displays this error it means that you have already created a set of recovery disks for your computer. Click OK. Reply dave stevens says: April 29, 2010 at 6:40 am Yeah the slimline pavillion range well most of including this one the s3015uk we had in for repair suffers from crappy

Hp Laptop Wont Start Up Windows 10

It may qualify for a new mother board. When the software confirms the creation process, at the "Recovery Manager successfully created the recovery media" screen, click Finish to quit the program. Press the F5 key to reset the default BIOS settings. Consider using an alternative recovery disk to fix boot errors or to access and backup your files - details here.

Download Easy Recovery Essentials for HP Note: Easy Recovery Essentials can not be used to install or reinstall Windows. Total lemon.The option to leave the cover off is good but then dust can and will damage the motherboard so, no solution but buying a new one. this connector is next to the CPU and the wires were bent toward the front of the PC and not straight up and down. Windows 10 Won't Start Up I'm not sure if I'll go that far.

Visit now Z7_3054ICK0KGTE30AQO5O3KA30H4 hp-feedback-banner-portlet Actions ${title} Loading... Hp Laptop Wont Boot Past Hp Screen Power Supply 160W 160W power supply I/O Ports Front I/O ports USB: 2 Headphone: 1 Back I/O ports Figure 8: Back I/O panel 1 - PS/2 mouse (green) 2 - Coaxial Got it from my sister/brother in law after it quit working for them and Best Buy told them it would cost $800 to fix. http://support.hp.com/us-en/document/c03513214 If the hard drive name is missing, or the text Auto or None is listed, exit the BIOS without saving any changes, then continue to the Hard drive is not detected

Keep them safe. Hp Laptop Not Booting I've ordered an Apevia 250-watt unit that should arrive at about the same time as the case. thanks Reply 0 Reply 0 0 erico Provost Posts: 40,508 Member Since: ‎01-07-2009 Message 2 of 22 (32,160 Views) Report Inappropriate Content Re: HP Pavilion s3100n slimline won't boot up Options The HP Recovery Manager software will now open.

  • An error message displays on the screen Select the closest match from the following list of error messages to find a solution to the problem.
  • Press the power button.
  • Let me know if any of this helps.
  • Z7_3054ICK0KGTE30AQO5O3KA3016 hp-feedback-input-portlet Actions ${title} Loading...
  • I hope that helps!
  • The software will also display how many DVDs you need or the minimum amount of space required for the USB flash drive.
  • If you opted for USB, the next screen will be a warning message where you need to confirm that the USB will be reformatted during the creation process.
  • Find the data cable connection on the motherboard.

Hp Laptop Wont Boot Past Hp Screen

If the hard drive is still not detected in the BIOS, replace the hard drive. Z7_3054ICK0KGTE30AQO5O3KA30R3 hp-product-builder-portlet Actions ${title} Loading... Hp Laptop Wont Start Up Windows 10 Always keep them safe! Hp Computer Startup Problems See Updating the BIOS for detailed steps.

Label them in order (Disk 1 of 2, Disk 2 of 2 etc.; or mark the USB) and keep them in a safe place! Thank you! Non-system disk error During the startup process, the computer is attempting to process information from an external media source. If the power adapter is still cold and the computer does not turn on, replace the power adapter. Hp Laptop Not Starting Up+black Screen

Step 3: Checking if the hard drive is detected in BIOS Perform the following steps to determine if the hard drive is detected in BIOS: Remove any media from the floppy File is missing For all file missing error messages that cause startup problems, see Step 4: Run Hardware Diagnostics tests. You can now start the disk creation process again. Making the disk from Command Prompt (if you're not able to access Windows XP) This method requires only CDs!

Showing results for  Search instead for  Do you mean  or Post new question Post new question Question Reply Topic Options Subscribe Mark Topic as New Mark Topic as Read Float this Hp Laptop Will Not Turn On Reply Barry says: November 16, 2008 at 5:58 pm I had same sitiation in serice work for a s3137c - Sometimes will will power up and sometime won't - If I Use the up and down arrow keys to select Apply Defaults and Exit, then press Enter.

Add the next blank disk and then click Next.

caution: Use a power adapter that meets the power requirements and has the correct type of connector to avoid damaging the computer. Figure : System Quick Test - Run once If the System Quick Test detects an issue, follow the instructions on the screen. Selecting your media will highlight the choice (by changing the background color). Hp Laptop Preparing Automatic Repair If the beeping noise stops, repair or replace those devices.

Do not use a non-HP AC power adapter with an HP computer. It's recommended to use DVDs (you need about 2). The biggest factors of heat are the Power Supply, CPU, and hard drive. Use the arrow keys to select Yes or OK, and then press Enter.

Reply erin says: October 12, 2008 at 11:26 am I performed a system recovery on my slimline, the machine went through the whole process booted up, explained it was now doing This step applies to those who opted for DVDs: The creation process will now continue with the second DVD. Reply The Jim Report says: February 13, 2012 at 9:24 am Thanks for the tip! The recovery disks can't be created on already used media.